Canon imageRUNNER ADVANCE 525 I, Руководство по обслуживанию

Страница: 484 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
PFWFTPRT 1 Set of RST reply at IP filter FTP SEND
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
When FTP SEND is executed using an IP filter by which packets from a specific remote PC are
rejected, SYN is returned to the port 113 if the PC supports authentication of the FTP port 113.
However, since the IP filter blocks the packets, the block logs are increased and the performance
is lowered.
When 1 is set, RST is returned to the port 113 without blocking packets.
Use Case When executing FTP SEND against the OS which supports authentication of the FTP port 113
while the IP filter is enabled
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
DDNSINTV 1 Set of DDNS periodical update interval
Detail DNS registration is executed only once at start-up with the current iR, so the registered contents
are deleted in an environment where the DNS server settings are deleted at intervals.
To set the interval of DDNS periodical update for not deleting the registered contents.
Use Case
When the DNS server settings are deleted at intervals
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 48
0: No periodical update, 1: 1-hour interval, 2: 2-hour interval, ..., 47: 47-hour interval, 48: 48-hour
interval
Unit
hour
Default Value
24
SIPAUDIO 2 Set of SIP session establishment order
Detail To set whether to establish audio session or T.38 session first with SIP.
Usually, audio session followed by T.38 session is established when using IPFAX in an intranet
environment. However, this order is not specified by the standard.
Set 1 when connecting the SIP server or terminal where the session starts with T.38 session.
Use Case When connecting the SIP server or terminal where the session starts with T.38 session
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution When 1 is set, IPFAX fails with the destination where the session starts with audio session.
Display/Adj/Set Range 0 to 1
0: audio, 1: T.38
Default Value 0
Supplement/Memo SIP: Session Initiation Protocol
SIPINOUT 2 Set of internal/external number to URI
Detail To set whether to store the external number or the internal number in From URI when using NGN.
Use Case
When a call cannot be made with external number while using NGN
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: External number, 1: Internal number
Default Value
0
Supplement/Memo NGN: Next Generation Network
URI: Uniform Resource Identifier
8. Service Mode
474