Canon imageRUNNER ADVANCE 525 I, Руководство по обслуживанию

Страница: 506 / 651

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
TNRB-SW 2 Display/hide of Toner Container counter
Detail To set whether to display the Toner Container counter on the Counter Check screen.
Use Case When showing the Toner Container counter to the user
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 4
0: Hide, 1: Display (70s only), 2: Not used, 3: Display (70s/180s), 4: Display (60s/70s/180s)
Default Value It differs according to the location.
Supplement/Memo 60s: The number of premature replacements of the Toner Container
70s: The number of installations of a new Toner Container
80s: The number of installations of a new Toner Con the number of premature
replacements
180s: The number of installations of unidentified Toner Container
USBH-DSP 2 ON/OFF of USB host use display
Detail To set whether to display "Preferences> External Interface> USB Settings> Use USB Host".
By selecting "1: Display", whether to use USB host on USB Settings screen can be selected.
Use Case
When switching to display or hide "Use USB Host" on USB Settings screen
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
0
Additional Functions
Mode
Preferences> External Interface> USB Settings> Use USB Host
USBM-DSP 2 ON/OFF USB ex-mem device MEAP driver use
Detail To set whether to display [Use MEAP Driver for USB Storage Device] in [Settings/Registration].
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
Use Case When not allowing the user administrator to select whether to use the MEAP driver
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When setting 0, be sure to make the setting after the specified setting is completed.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 1
Additional Functions
Mode
Preferences> External Interface> USB Settings> Use MEAP Driver for USB External Device
USBI-DSP 2 ON/OFF USB input device MEAP driver use
Detail To set whether to display [Use MEAP Driver for USB Input Device] in [Settings/Registration].
When 0 is set, the item is not displayed so that the user administrator cannot change the setting.
Use Case When not allowing the user administrator to select whether to use the MEAP driver
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When setting 0, be sure to make the setting after the specified setting is completed.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 1
Additional Functions
Mode
Preferences> External Interface> USB Settings> Use MEAP Driver for USB Input Device
8. Service Mode
496