Setting NetWare
®
Print Service
9
4-9
Note
Important
Note
z
This procedure is not required for the queue server mode.
This completes the settings for NetWare
®
Print Service. Now, you are ready
to set the printer protocol settings. (
Æ
“Setting NetWare
®
Printer Protocol”
P.4-11)
Using Bindery Queue Server Mode/Remote Printer Mode
1
Log into NetWare
®
as the Supervisor, then start PCONSOLE.
2
Follow the procedure below to create the print server if one has not
been created.
From Available Options, select Quick Setup, then press the
Enter key.
Enter the name of the print server to create and enter the
names of the new printer and the queue.
z
If your print service is queue server mode, don’t set a password for the print server.
z
Take a note to record the print server name. The printer server name will be
required when you perform the printer protocol settings.
3
Set the printer type.
To use the queue server mode, select Other/Unknown for
Printer type. To use the remote printer mode, select Parallel for
Printer type, then select Manual Load for Location.
Press the ESC key.
When the confirmation box is displayed, click Yes then press
the Enter key.
Содержание imagePROGRAF W2200S
Страница 1: ...Graphic Color Printer...
Страница 84: ...NetWare Settings Windows 4 18...
Страница 91: ...6 Troubleshooting This chapter describes how to solve problems that may occur during operation of the printer...
Страница 97: ...7 Other Important Information This chapter contains additional information for your reference...