TCP/IP Network Settings (Windows)
2
2-2
Important
Procedures Required for a TCP/IP Network
Here is a summary of the procedure required to set the printer for use on a
TCP/IP network.
z
Steps 1, 2, and 3 should be performed by the network system administrator.
z
The following print applications can be used to print on a TCP/IP network: LPD,
FTP, RAW (Windows XP, Windows 2000), and IPP (Windows XP, Windows 2000,
Windows Me, Windows 98, Windows 95)
1
Connect the network cable
Æ
Setup Guide
Follow the instructions in the Setup Guide to connect the network cable.
2
Setting the Printer IP Address
Æ
P.2-3
Setting the IP address allows setting the printer protocol to enable communication between the
printer and the computer. You can use one of the methods below to set the protocol:
• GARO Device Setup Utility (Canon software application provided with the printer)
• ARP/PING command
• Printer operation panel
3
Setting TCP/IP Protocol for the Printer
Æ
P.2-9
This procedure selects TCP/IP for the printer protocol. You can use one of the methods below to
set the protocol from the computer.
• Web Browser (Remote UI)
• FTP Client
4
Setting the Computer
Æ
P.2-17
This procedure is performed for each computer to be used for printing.
Содержание imagePROGRAF W2200S
Страница 1: ...Graphic Color Printer...
Страница 84: ...NetWare Settings Windows 4 18...
Страница 91: ...6 Troubleshooting This chapter describes how to solve problems that may occur during operation of the printer...
Страница 97: ...7 Other Important Information This chapter contains additional information for your reference...