Canon imagePROGRAF W2200S, Руководство пользователя

Страница: 24 / 107

TCP/IP Network Settings (Windows)
8
2-8
Note
Important
4
Press or to select “Ethernet II” then press .
5
Press or to select “IP Mode” then press .
6
Select the method for setting the printer IP address. Press or to
select either setting below then press .
Automatic:
Select when the IP address is to be set with DHCP, BOOTP, or RARP.
Manual:
Select when the IP address is to be assigned directly for the printer.
7
If “Automatic” was selected at Step 6, press or to select
“Protocol”, press , then select ON or OFF for DHCP, BOOTP, and
RARP.
If “Manual” was selected at Step 6, press
or to select “IP
Setting”, press , then select “IP Address”, “Subnet Mask”, or
“Default G/W”.
z
Use the following method to select “IP Address”, “Subnet Mask”, or “Default G/
W”:
1. Press or to select the target field then press .
2. Press or to select the desired number then press .
3. Repeat Step 1 and 2 for all fields.
8
Press 3 times, press or to select Regis. Settings, then press
.
z
In order to save the settings done in Step 4 to Step 7, you must execute “Regis.
Settings”. The selected settings will not be enabled unless they are registered with
“Regis. Settings”.
9
When you see “Execute?” in the operation panel display, press .
10
When you see “Registered!” in the operation panel display, press the
Online button. The Online lamp lights.
The printer is ready to print.