Canon imagePROGRAF W2200S, Руководство пользователя

Страница: 29 / 107

Setting TCP/IP Protocol for the Printer
13
2-13
Note
Note
z
The check to determine whether DHCP, BOOTP, or RARP can be used requires
about 1 or 2 minutes to execute. Clicking off the check boxes for a method that
cannot be used is recommended.
z
In order to have DHCP, BOOTP, or RARP assign the IP address, the DHCP,
BOOTP, or RARP must be booted.
7
Enter the IP Address, Subnet Mask, and Gateway Address in the
appropriate text box.
For the “IP Address” enter the IP address of the printer. For “Subnet Mask”
and “Gateway Address” enter the settings for the TCP/IP network.
z
When using DHCP, BOOTP, or RARP you cannot select more than one. The value
acquired from DHCP, BOOTP, or RARP is used.
8
Below the IPP URL text box, click the Raw Mode Bi-direction button
on. Normally this setting does not need to be changed.
9
Perform the DNS settings.
In the DNS Server Address text box, enter the IP address of the DNS server.
Next, in the DNS Domain Name text box, enter the assigned domain name
of the printer.
Example: sales_dept.xyz_company.co.jp
z
DNS can be used for this printer in the following cases:
• When the dynamic update function is enabled by clicking DNS Dynamic
Update on (see Step 10 below).
• After the name of the SMTP server has been specified with the entry in the
SMTP Server Address box (see Step 11 below).
10
When the dynamic update function is used for DNS, click the DNS
Dynamic Update check box on and set the following items:
DNS Host Name: Enter the host name of the printer.
(Example: sales_printer)
DNS Domain Name: Enter the assigned domain name of the printer.
(Example: sales_dept.xyz_company.co.jp)