Canon imagePROGRAF W2200S, Руководство пользователя

Страница: 28 / 107

TCP/IP Network Settings (Windows)
12
2-12
Note
Note
5
Click the Frame Type list box and select Ethernet II.
z
If you select Disabled, the network interface board will no longer be recognized on
the TCP/IP network.
z
To use the printer with “Disabled” specified, perform the IP address setting
described in “Setting the Printer IP Address” (
Æ
P.2-3)
6
Select the method for setting the printer IP address.
To set the IP address, first click all the buttons off.
If the IP address is to be acquired automatically, click on the button for the
method to be used: DHCP, BOOTP, or RARP.
z
If you select DHCP, BOOTP, or RARP to select the IP address, make sure that the
IP address can be set by DHCP, BOOTP, or RARP at power on after a reset. After
confirming which setting can be used, the IP address is assigned. If the check box
for DHCP, BOOTP, or RARP is clicked off, the check is not performed with that
function. If none of these methods can be used, perform the IP address setting then
enter the IP address into the
“I P Address” text box.