Canon imagePROGRAF IPF9000S, Руководство пользователя

Страница: 807 / 832

Messages regarding paper
End of paper feed.
Cause Corrective Action
You are pressing the ▲ button on the Control Panel
and trying to rewind the roll to the edge.
Release the ▲ button.
Paper can be retracted only up to 17 mm when using
the Media Take-up Unit. Release the ▲ button.
Rel lever is in wrong position.
Cause Corrective Action
Lower the Release Lever. The Release Lever is up.
If the error occurs again, turn off the printer and wait
a while before restoring power.
Rewinding error.
Cause Corrective Action
There is some foreign object near the Media Take-up
Unit sensor and the roll cannot be detected. Remove the foreign object near the sensor.
The Media Take-up Unit sensor is soiled and the roll
cannot be detected. Wipe the sensor with a dry cloth to clean it.
The roll is out of range of detection of the Media
Take-up Unit sensor. Reload the roll.
(→P.120)
The Media Take-up Unit sensor is damaged. Contact your Canon dealer for assistance.
* Printing will stop momentarily if an error involving the Media Take-up Unit occurs. If you prefer printing
not to stop, set Skip Take-Up Err to On .
Media take-up unit ready.
Cause Corrective Action
Press the Stop button and stop printing.
The mode switches from take-up mode to regular
mode after you change the
Take-up Reel setting in
the MAIN MENU from Enable to Disable and lift the
Release Lever, or after you execute Paper Cutting .
The Take-up Reel setting in the printer MAIN MENU
was changed from Enable to Disable , but a print job
was received before the roll was removed.
Press the Online button to resume printing.
Turn on the media take-up unit.
Cause Corrective Action
The Media Take-up Unit was off when you selected
Enable for Take-up Reel .
Turn the Media Take-up Unit on.
Error Message 791