manualshive.com logo in svg

Canon imagePROGRAF iPF770, Руководство пользователя

Принтер Canon imagePROGRAF iPF770 с функцией печати формата А1. Для настройки и использования устройства необходимо скачать бесплатный руководство по эксплуатации на manualshive.com. Идеальное решение для профессиональной печати и дизайна.

Поделиться
Скачать
background image

Cannot print over a network

Cannot print over a network

Cannot connect the printer to the network .....................................................................................................

545

Cannot print over a TCP/IP network ...............................................................................................................

545

Cannot print over a Bonjour network ..............................................................................................................

545

Cannot connect the printer to the network

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer
on. For instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The bottom indicator is green if the printer is connected via 1000Base-T, while the top indicator is orange
if connected via 100Base-TX and the top indicator is green if connected via 10Base-T.
If the Link indicator is not lit, check the following points.

•

Make sure the connection point is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the connection point.
Although the printer normally detects the communication mode and transmission rate of the communi-
cation point automatically (in auto negotiation mode), sometimes the communication point settings
cannot be detected. In this case, configure the connection method manually, specifying the communi-
cation mode in use.

 (See "Configuring the Communication Mode Manually.")

➔

P.455

Cannot print over a TCP/IP network

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not configured
correctly.

Make sure the printer's IP address is configured correctly.

 (See "Configuring the IP Address Using imagePROGRAF Device Setup Utility.")

➔

P.457

 (See "Configuring the IP Address Using the Printer Control Panel.")

➔

P.446

The printer's TCP/IP network settings are
not configured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer's TCP/IP Network Settings With RemoteUI.")

➔

P.450

The computer you are trying to print from
is not configured correctly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "Configuring the Printer Driver Destination (Windows).")

➔

P.449

 (See "Configuring the Destination in TCP/IP Networks (Mac OS).")

➔

P.453

Cannot print over a Bonjour network

Cannot print over a Bonjour network

Cause

Corrective Action

The computer you are trying to
print from is not configured cor-
rectly.

Make sure the computer is configured correctly.

 (See "Configuring the Destination for Bonjour Network (Mac OS).")

➔

P.453

The computer and printer are not
on the same network.

Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.

iPF770

                                                                                                                                                               

Cannot connect the printer to the network

User's Guide

                                                                                                                                                                                                                      

 

 

Troubleshooting

Cannot print over a network

545

 

Содержание imagePROGRAF iPF770



















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для imagePROGRAF iPF770

QMS 3260 Getting Started Manual preview
3260
Бренд: QMS Страницы: 86
Xante Ilumina Repacking And Shipping Manual preview
Ilumina
Бренд: Xante Страницы: 6
Xerox PHASER 6121MFP Service Manual preview
PHASER 6121MFP
Бренд: Xerox Страницы: 532
Xerox Phaser 6120 User Manual preview
Phaser 6120
Бренд: Xerox Страницы: 174
Xerox Phaser 6115 MFP Repacking Manual preview
Phaser 6115 MFP
Бренд: Xerox Страницы: 2
Xerox Phaser 6115 MFP User Manual preview
Phaser 6115 MFP
Бренд: Xerox Страницы: 219
Xerox PHASER 6010 Quick Use Manual preview
PHASER 6010
Бренд: Xerox Страницы: 5
Xerox Phaser 6140N Product Safety Data Sheet preview
Phaser 6140N
Бренд: Xerox Страницы: 3
Xerox Phaser 6128 MFP Installation Manual preview
Phaser 6128 MFP
Бренд: Xerox Страницы: 2
Xerox Phaser 6128 MFP Evaluator Manual preview
Phaser 6128 MFP
Бренд: Xerox Страницы: 16
Xerox Phaser 6125 Specifications preview
Phaser 6125
Бренд: Xerox Страницы: 2
Xerox Phaser 7800 Training preview
Phaser 7800
Бренд: Xerox Страницы: 9
Xerox Phaser 7800 Quick Manual preview
Phaser 7800
Бренд: Xerox Страницы: 12
Xerox Phaser 7750 Adding Memory Manual preview
Phaser 7750
Бренд: Xerox Страницы: 2
Xerox Phaser 7750 Setup Manual preview
Phaser 7750
Бренд: Xerox Страницы: 2
Xerox Phaser 8500 Quick Manual preview
Phaser 8500
Бренд: Xerox Страницы: 4
Xerox Phaser 8500 Detailed Specifications preview
Phaser 8500
Бренд: Xerox Страницы: 4
Xerox Phaser 6500 User Manual preview
Phaser 6500
Бренд: Xerox Страницы: 162

Бренды по названию

Популярные бренды

Загрузить еще бренды