Canon imagePROGRAF iPF770, Руководство пользователя

Страница: 420 / 594

Setting Item Description, Instructions
Adjust
Printer Feed
Priority
Adjust
Length Adjust-
ment-
Print A:High Print a test pattern for particular types of paper to com-
pensate for paper stretching or shrinkage, after which you
enter the amount of adjustment.
(See "Adjusting Line
Length.")
➔
P.491
B:Standard/Draft
Change
Settings A:High Displayed when you have selected Feed Priority > Adj.
Priority > Print Length .
Adjustment relative to the amount of stretching or shrink-
age of the current paper.
Enter either the adjustment results from
AdjustmentPrint
or the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount
by choosing a higher adjustment value. For paper that
tends to shrink, decrease the feed amount by choosing a
lower adjustment value.
(See "Adjusting Line
Length.")
➔
P.491
B:Standard/Draft
Mainte-
nance Head Cleaning Clean the Printhead. (See "Cleaning the Print-
head.")
➔
P.503
Choose Head Cleaning A if printing is faint, oddly col-
ored, or contains foreign substances.
Choose
Head Cleaning B if no ink is printed at all, or if
printing is not improved by Head Cleaning A .
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head Execute when replacing the Printhead. Follow the instruc-
tions displayed to complete the required procedure.
(See
"Replacing the Printhead.")
➔
P.504
Not displayed during a warning message that the remain-
ing Maintenance Cartridge capacity is low.
Repl. maint cart Execute when replacing the Maintenance Cartridge. Fol-
low the instructions displayed to complete the required
procedure.
(See "Replacing the Maintenance Car-
tridge.")
➔
P.509
Head Info Indicates information about the printhead.
GL2 Replot Clear the print data in the replot buffer.
GL2 BufferClear Print in monochrome.
GL2
Settings Quality
Manag-
er Color
Mode
(
*3
)
Monochrome Print in monochrome.
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print with approximate colors emulating Canon iPF750,
iPF755, iPF650, iPF655, iPF760, iPF765.
Color (CAD) 3 Print emulating the following printers, in colors resembling
colors produced by these printers: Canon iPF500, iPF600,
iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810,
iPF820, iPF815 and iPF825.
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors re-
sembling colors produced by these printers.
Color (CAD) 5 Print emulating the HP Designjet T1100, in colors resem-
bling colors produced by this printer.
Print Quality Choose the print quality.
Input Resolution Choose the printer input resolution, 600dpi or 300dpi .
Print (Economy) When On is selected, print using less ink.
However, the quality is lower than regular printing.
Select
On to conserve ink such as the layout confirmation.
Note that although Print (Economy) is only available
when Fast is selected in Print Quality , it might not be
available depending on the paper type.
Menu Settings iPF770
User's Guide
Control Panel
Printer Menu
420