11
Troubleshooting
Colors in printed images are
uneven
Color may be uneven between
dark and light image areas.
Density may be uneven if you use
Glossy Paper
or Coated Paper
.
When borderless printing is used,
the edge of the paper is cut during
printing. Thus, ink density may be
slightly uneven at the edges.
The Printhead
is out of alignment.
Allowing printed documents to dry
on top of each other may cause
uneven colors.
Select
Unidirectional Printing
in the
Advanced
Settings
of the printer driver.
In
Advanced Settings
of the printer driver, choose
Highest quality
or
High
in
Print Quality
.
Specify
No
in
Auto Cut
in the printer driver before
printing. In this case, the paper can be printed without
borders on the left and right sides only. Cut the printed
document ejected from the printer, and then use
scissors or a cutting tool to cut away the edges on the
top and bottom.
Adjust the Printhead
alignment.
Choose a higher level of
Print Quality
in the
Advanced Settings
of the printer driver.
To avoid uneven colors, we recommend drying each
sheet separately.
Phenomenon
Cause
Corrective Action
(
→
"Giving Priority to Particular Graphic Elements and
Colors for Printing," User's Guide)
(
→
, If Vertical Lines are Warped or Colors are
Misaligned)
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in
the printer driver.
Make sure the same type of paper is specified in the
printer driver as you have loaded in the printer.
(
→
, Loading Rolls in the Printer)
(
→
, Loading Sheets in the Printer)
Press the
Stop
button and stop printing.
1.
Change the type of paper in the printer driver and
try printing again.
2.
Colors may be uneven at the
trailing edge when you print on
heavyweight sheets even if you
execute
Adj Far Ed Feed
.
For heavyweight sheets or similar paper, execute
Adj
Far Ed Feed
with the
Front Tray Guides
raised. Also
keep the
Front Tray Guides
raised during printing.
Lower the
Front Tray Guides
when printing on paper
other than heavyweight sheets.
Scan Wait Time
>
Area
in the
Control Panel
menu is set to
Leading edge
.
"When
Scan Wait Time
>
Area
is set to
Leading
edge
, colors may be uneven 110–140 mm from the
leading edge. (The position varies depending on the
Print Quality
setting.)
In this case, select
Scan Wait Time
>
Area
>
Entire
area
.
However, note that printing will now take longer.
(
→
, Menu Map)
When you load paper in the
Front
Paper Feed Slot
and print, colors
may be uneven at the leading
edge of the paper.
Choose a higher level of
Print Quality
in the
Advanced Settings
of the printer driver.
Printing in
Fast
or
Standard
mode is faster and
consumes less ink than in
Highest quality
or
High
modes, but the printing quality is lower.
(
→
"Giving Priority to Particular Graphic Elements and
Colors for Printing," User's Guide)
Straighten the paper if it is warped, and then load it
straight into the printer.
(
→
"Loading Sheets in the Feed Slot," User's Guide)
Содержание imagePROGRAF iPF6300S
Страница 51: ......
