![background image](http://html1.mh-extra.com/html/canon/imageformula-dr-9080c/imageformula-dr-9080c_service-manual_4188138012.webp)
1 - 4
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 1 GENERAL DESCRIPTION
3. Document
Feeding
Specifications
Item
DR-9080C DR-6080
1. Document size
1) Width: 55 to 305 mm
2) Length: 70 to 432 mm (Up to 1000 mm for long document mode)
3) Thickness: Separation 0.06 to 0.15 mm, (48 to 120 g/m
2
)
Non-separation: 0.05 to 0.30 mm (40 to 240 g/m
2
)
2. Document requirements
1) Pressure-sensitive paper: Can be fed. (The orientation is restricted.)
2) Carbon-backed paper: Cannot be fed.
3) Perforated paper: Can be fed only if there are 2/3/4 holes that are
φ
8
mm or less in size.
4) Curled paper: Can be fed only if curl is 8 mm or less in height. (Total of
the curled amount of max. pick-up storage)
5) Creased paper: Can be fed, but crease must be straightened before
being fed.
Note:
When staple detection is used, paper curl must be 3 mm or less in
height and creased paper cannot be fed.
3. Pick-up mode
Normal/Panel/Auto/Manual
Note:
Manual here indicates manual feeding in non-separation mode.
4. Pick-up storage
1) For A4 or smaller:
500 sheets (Must be 48 mm or less in height, including any curl.)
2) For larger than A4:
The height must be less than 20 mm.
5. Delivery storage
1) For A4 or smaller:
500 sheets (Must be 50 mm or less in height, including any curl.)
2) For larger than A4:
The height must be less than 20 mm.
6. Delivery direction
Face down
7. Automatic size detection
Sensor/image processing
8. Staple detection
1) Paper thickness: 0.06 to 0.12 mm
2) Paper size: A5 or Larger
3) Staple: Stapling must be in only one corner.
9. Double feed detection
Overlapping (by ultrasonic)/Length
10. Skew correction
Mechanical/image processing
Resolution Binary/Grayscale
Color
100 x 100 dpi
686 mm/sec
686 mm/sec
150 x 150 dpi
686 mm/sec
457 mm/sec
200 x 200 dpi
686 mm/sec
343 mm/sec
240 x 240 dpi
686 mm/sec
286 mm/sec
300 x 300 dpi
686 mm/sec
229 mm/sec
400 x 400 dpi
286 mm/sec
96 mm/sec
11. Feeding speed
600 x 600 dpi
191 mm/sec
64 mm/sec
Table 1-203a (continued)
Содержание ImageFormula DR-9080C
