![background image](http://html1.mh-extra.com/html/canon/imageformula-dr-9080c/imageformula-dr-9080c_service-manual_4188138102.webp)
3 - 20
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 3 DISASSEMBLY & REASSEMBLY
Precautions during assembly
•
With the shading plate
located all the way
inside, install the gears of the solenoid side and
the shading plate side so that the gear teeth
(outer one) of the solenoid side
is positioned
at the top. Remember to install the spacer
into the plunger.
Shading plate
Gear teeth (outer one) of the solenoid side
Spacer
Fig. 3-223
•
With the plunger of the solenoid pushed inward,
fix the solenoid at the position where the
shading plate is farthest outward.
Fig. 3-224
9. Shading solenoid (upper side)
1) Remove the upper unit.
2) Dismount the reading roller guide plate
and feed guide plate 1
to detach the
Feeder follower roller. Refer to the section
entitled "III. FEED SYSTEM".
Reading roller guide plate
Feed guide plate 1
Fig. 3-225
3) Unhook the connector
, remove two
screws A
, and detach the solenoid body
. Remove two screws B (with
round-shaped tips)
and detach the
plunger assembly .
Connector
Screw A
Solenoid body
Screw B
Plunger assembly
Fig. 3-226
Содержание ImageFormula DR-9080C
