18
Chapter 2
Preparation Before Use
Checking Your Operating
Environment
Your computer system must meet the following conditions to use the
DR-6080/9080C.
●
IBM PC/AT or compatible machines that meet the following
specifications:
• Intel Celeron 733 MHz or faster
• 256 MB main memory or more (recommended)
• 100 MB or more of free space on the hard disk
●
SCSI card that is compatible with this scanner or Hi-Speed USB 2.0
interface card (See “Connecting to a Computer,” on p.19.)
●
Monitor that can display at a resolution of 1024 x 768 (XGA) or greater is
recommended.
●
One of the following operating systems:
For SCSI
• Microsoft Windows 98SE
• Microsoft Windows Me
• Microsoft Windows NT 4.0 Workstation SP6
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP SP1
For USB
• Microsoft Windows 98SE
• Microsoft Windows Me
• Microsoft Windows 2000 Professional SP4
• Microsoft Windows XP SP1
●
Either an ISIS (compatible) or a TWAIN (compatible) application that
operates on one of the operating systems noted above.
●
Use the latest USB 2.0 driver when using USB connections. Contact your sales
representative.
●
If the CPU, memory, SCSI card, or USB interface card does not meet the
recommended specifications, the scanning speed may slow down or the time
required to transfer data may increase.
Important
Содержание ImageFormula DR-9080C
