Canon image Prograf iPF680 Series, Руководство пользователя

Страница: 274 / 702

12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper) .
The upper and lower margins can be checked in Print Preview .
Note
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• When Saturation is selected, you can print posters, etc., vividly.
• Press the Print Preview button to display the preview screen. You can check and make changes to the layout
in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
13
Press Print to start printing.
Important
•
If divided into plural pages, try reducing the data size or the range you select.
• You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.
Configuring Binding (Excel)
Configuring Binding (Excel)
You can configure Binding margins for binding printouts.
1
Configure the settings up to Layout Selection in the Layout screen in Print Entire Sheet or Print Selected
Area .
Refer to
"Print Entire Sheet(Excel)"
➔
P.269
and
"Print Selected Area(Excel)"
➔
P.271
for the configuration
methods.
2
Click the Binding Settings button.
Important
• You cannot click the Binding Settings button in the following situations.
• When the Image Size is set to a value smaller than 100%
• When a graph is selected
• When page breaks have been set
• When a sheet or cell is protected
Open the Binding Settings dialog box.
3
If the Binding checkbox is not checked, select it to turn binding on.
4
Select Binding Edge .
5
Select Binding Margin .
Configuring Binding (Excel)
iPF685
User's Guide
Windows Software
Print Plug-In for
Office
274