Canon image Prograf iPF680 Series, Руководство пользователя

Страница: 464 / 702

Setting Item Description, Instructions
GL2 Set-
tings Quality
Manager
Print Quality Choose the print quality.
Input Resolution Choose the printer input resolution, 600dpi or 300dpi .
Print (Economy) When On is selected, print using less ink.
However, the quality is lower than regular printing.
Select
On to conserve ink such as the layout confirmation.
Note that although Print (Economy) is only available when
Fast is selected in Print Quality , it might not be available
depending on the paper type.
Paper
Manager Paper Source Choose the source of paper for HP-GL/2 printing.
Margin Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in
Paper
Details , the larger of the setting values has priority.
Oversize Set the position of the margin relative to the image range.
Choose
Off to set the margin inside the image range.
The image may be missing depending on the layout.
Choose
On to set the margin outside the image range.
Although the image will not be missing, you should print on
paper larger than the size of the image range plus the mar-
gins.
Conserve Paper Conserves paper when printing.
Auto Rotate If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, im-
ages may be cut off or the blank paper may be ejected. In
this case, set
Auto Rotate to Off .
Enlarge/Reduce Enlarge or reduce the image.
Choose
Specify scaling to print based on the specified
scaling value.
The specified range is 25 to 400 %.
Choose
Fit to paper to print by resizing to fit the paper loa-
ded in the printer.
If
Standard cut is On , the printing is resized to fit the stand-
ard paper size.
Print centered Print in the center of the paper.
Standard cut Automatically selects the best standard paper size from the
width of the loaded roll paper and the image size and cuts
the roll paper.
Nesting Use Nesting Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Nesting WaitTime Specify a time to wait until printing, as desired.
Cut Lines Select On to print cut lines between each document on the
roll.
Line &
Pen
Manager Enable merge Specify whether to merge or print over colors where lines
overlap.
Menu Settings
iPF685
User's Guide
Control Panel
Printer Menu
464