Canon im2520f, Инструкции по установке, Страница: 45 / 143

9210
– 2 –
4344-7741-01
■ Unpacking
1. Check that the following items are contained in the Box of Accessories.
NOTE
When the Duplexing Document Feeder is to be installed at the same time that any of
the following options is mounted, be sure first mount these options before installing
the Duplexing Document Feeder: Data Terminal, Data Controller, and Hard Disk.
■ Installing the Duplexing Document Feeder
1 Shoulder Screw......................................................................................2
2 Decorative Screw ...................................................................................2
3 Document Pad .......................................................................................1
4 Setup Instructions (this manual).............................................................1
4344U001AA
(1)
(2)
(3)
4344U002AA 4344U003AA
(4)
2. Remove the protective tape and shipping
preservatives and remove the protective
vinyl bag of the hookup cord.
4344U004AA
1. Install the two Shoulder Screws furnished
with the Duplexing Document Feeder to the
hinge mounting portion.
NOTE
Use the outer threaded holes to install the
Shoulder Screws.
4344U005AA
2. Place the Duplexing Document Feeder on
the copier. Then, temporarily secure the
hinge on the left as viewed from the front
using the Decorative Screw.
4344U006AA
4344U008AA
4344U007AA
3. Position the Duplexing Document Feeder so
that the center of the graduations marked on
the right hinge base is aligned with the center
of the threaded hole. Then, tighten the
Decorative Screw.
4. Positively tighten the Decorative Screw on
the left hinge and that on the right hinge.
4344U009AA
4344U028AA