manualshive.com logo in svg

Canon GP200, Руководство по обслуживанию, Страница: 390 / 458

Поделиться
Скачать
Canon GP200 Скачать руководство пользователя страница 390

5. Adjusting NL (for model with FAX function only)

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

5–22

5. INSTALLATION

No.

1

2

3

4

5

Work

Start FAX service mode.

Press '#2. MENU' on the Menu screen, and
press the OK key.

Press 'NLEQ' on the screen to highlight.
When the ON/OFF Setting screen has
appeared, press 'ON' or 'OFF'. (The select-
ed notation will be highlighted.)

Press the OK key.

Press the Cancel key, and press the Reset
key twice to end service mode.

Remarks

Starting FAX Service Mode

1) Check to make sure that the handle of the

separation static eliminator cleaning brush
is inserted into the fixing assembly releas-
ing assembly. In addition, make sure that
the door switch actuator is inserted into the
door switch assembly.

2) Push the service switch with a hex key.
3) Press the * key twice.

•

The Service Mode Menu screen will
appear.

4) Press '*8* FAX' on the screen, and press

the OK key.

•

The Menu screen will appear.

Содержание GP200











































































































































































































































































































































































































































































Отзывы:

Нет отзывов