manualshive.com logo in svg

Canon GP200, Руководство по обслуживанию, Страница: 327 / 458

Поделиться
Скачать
Canon GP200 Скачать руководство пользователя страница 327

I. BEFORE THE WORK/POINTS TO NOTE

A. Main Power Switch and Others

Be sure to turn OFF the main power switch and disconnect the power plug before starting disassem-

bly/assembly work.

In addition, observe the following:

1. The secondary battery starts to operate (discharge) when the main power switch is turned OFF to

retain fax memory images.
Be sure to finish any work performed with the main power switch off within one hour to save the bat-
tery. (The machine must be kept powered for at least one week after installation.)

2. You can check whether there is a fax memory image by referring to the memory tx/rx indicator on the

control panel.
The memory tx/rx lamp is ON when there is a fax memory image. In such a case, print out the mem-
ory image; then, turn OFF the power switch, and disconnect the power plug.

3. Some units remain powered after the control panel power switch is turned OFF; be sure to turn OFF

the main power switch.

4. Keep in mind that the machine will remain powered even when the front door is opened as long as the

control panel power switch and the main power supply switch are ON.

4–1

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. MECHANICAL SYSTEM

q

Control panel power switch

e

Main power lamp

w

Main power switch

r

MEMORY TX/RX lamp

* For USA, ‘PRIN·I/F’

Figure 4-101

2

COPY

FAX

OPTIONS

1

3

4

*

Содержание GP200











































































































































































































































































































































































































































































Отзывы:

Нет отзывов