manualshive.com logo in svg

Canon GP200, Руководство по обслуживанию, Страница: 312 / 458

Поделиться
Скачать
Canon GP200 Скачать руководство пользователя страница 312

10

Isolating the PCBs (FAX image fault)

3–258

COPYRIGHT © 1996 CANON INC.               CANON GP215/200 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)

A printer image is faulty.

Make a copy using the 
copier only.

Is the copy image normal?

NO

Is the test print 

image normal?

NO

Execute test printing in 
service mode.

Suspect a fault in the image 
formation system including 
the image processor PCB. 
Make a correction according 
to the appropriate instructions 
in the service manual.

Suspect a fault in the 
reading system (mirror, 
lens, CCD, analog 
processor PCB, etc.). Make 
a correction according to 
the appropriate instructions 
in the Service Manual.

YES

YES

Execute FAX test printing:
• trial shot
• VIDEO TEST

Is the test print 

image normal?

NO

Re-connect the CORE/IP 
Board, FAX Motherboard, 
and FAX Board.

Execute FAX test printing:
• trial shot
• VIDEO TEST

Is the test print 

image normal?

NO

Try replacing the FAC 
Motherboard and the 
CORE/IP Board, which 
affect printer images.

YES

YES

Suspect a fault in the party 
or the line.

Содержание GP200











































































































































































































































































































































































































































































Отзывы:

Нет отзывов