Canon GP200 Скачать руководство пользователя страница 337

Страница: 337 / 458

4. Setting the Mirror Positioning Tool

Use the mirror positioning tool FY9-3009-040 by changing its pin arrangement for the machine.
Refer to the figures for the correct order;

, and

indicate the positions of the pins and

and

indicate the pins.

Figure 4-306 (FY9-3009-040)

Figure 4-307

(arranged for the front of the machine)

1) Relocate the pins of the mirror positioning tool so that it may be used for the machine.

Figure 4-308

Note:
The pin

of the mirror positioning tool (FY9-3009-040) will not be used for the machine.

Attach the
longest pin
to

Attach the
shortest pin
to

<Front>

<Rear>

4–11

4. MECHANICAL SYSTEM

Содержание GP200










































































































































































































































































































































































































































Результаты поиска

Содержание GP200

Отзывы:

Canon GP200, Руководство по обслуживанию, Страница: 337 / 458

Результаты поиска

Содержание GP200

Отзывы: