3
Menu Settings
434
5
: Set-up 2
(Yellow)
Page
* Not displayed for Live View shooting or movie shooting.
5
: Set-up 3
(Yellow)
Auto power off
10 sec/30 sec / 30 sec. / 1 min. / 2 min. /
4 min. / 8 min. / 15 min. / Disable
313
LCD brightness
Adjust the brightness (seven levels)
314
LCD off/on button*
Shutter button / Shutter/DISP / Remains on
326
Date/Time/Zone
Date (year, month, day) / Time (hour, min., sec.) /
Daylight saving time / Time zone
45
Language
K
Select the interface language
48
Viewfinder display*
Electronic level: Hide / Show
72
Grid display: Hide / Show
74
Flicker detection: Show / Hide
75
GPS device settings
Settings available when the GPS Receiver
GP-E2 (sold separately) is attached
-
Video system
For NTSC / For PAL
357
Touch control
Standard / Sensitive / Disable
68
Beep
Enable / Touch
n
/ Disable
312
Battery information
Remaining capacity / Recharge performance
407
Sensor cleaning
Auto cleaning
f
: Enable / Disable
327
Clean now
f
Clean manually
331
Cautions for Using GPS Receiver GP-E2 (sold separately)
Check if your country or area allows the use of GPS and follow any legal
regulations.
Update the GP-E2’s firmware to Version 2.0.0 or later. (Using the cable
for connection is not possible with firmware versions earlier than Version
2.0.0.) When updating the firmware, an interface cable (sold separately,
p.427) must be used. For how to update the GP-E2’s firmware, refer to
the Canon Web site.
Note that the digital compass cannot be used with this camera. (Shooting
direction will not be recorded.)
