Canon EOS REBEL T7I, Инструкция по эксплуатации

Страница: 221 / 488

221
Easy Wireless Flash Photography
N
4
Select [Built-in flash settings].

Select [ Built-in flash settings ], then
press <
0
>.
5
Select [EasyWireless].

For [ Built-in flash ], select
[ EasyWireless ], then press <
0
>.
6
Set [Channel].

Set the transmission channel (1-4) to
the same one as the slave unit.
7
Take the picture.

Set the camera and take the picture
in the same way as with normal flash
photography.
8
Exit the wireless flash
photography.

For [ Built-in flash ], select
[ NormalFiring ].

Setting [ E-TTL II meter. ] to [ Evaluative ] is recommended.

Even if the firing of the built-in flash is disabled when [ EasyWireless ] is
set, it will still fire a small flash in order to control the slave unit.
Depending on shooting conditions, the flash fired to control the slave unit
may appear in the picture.

Test flash firing function is not available with the slave unit.