223
This is fully automatic wireless flash
photography with one external Speedlite
and the built-in flash.
You can change the flash ratio between
the external Speedlite and built-in flash
to adjust how the shadows cast on the
subject.
On the menu screens, the <
0
> and
<
1
> icons indicate the external
Speedlite, and the <
3
> and <
2
>
icons indicate the built-in flash.
1
Select [CustWireless].
Follow step 5 on page 221 to select
[
CustWireless
], then press <
0
>.
2
Select [Wireless func.].
For [
Wireless func.
], select
[
0
:
3
], then press <
0
>.
3
Set the desired flash ratio and
take the picture.
Select [
1
:
2
] and set the flash ratio
within 8:1 to 1:1. Setting a flash ratio
to the right of 1:1 is not possible.
Custom Wireless Flash Photography
N
Fully Automatic Shooting with One External Speedlite
and Built-in Flash
If the built-in flash output is not enough, set a higher ISO speed (p.152).
The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop
increments) for the exposure level.
