3
Setting the Flash Function
N
216
The Custom Functions displayed under [
External flash C.Fn setting
]
vary depending on the Speedlite model.
1
Display the Custom Function.
With the camera ready to shoot with
an external Speedlite, select
[
External flash C.Fn setting
], then
press <
0
>.
2
Set the Custom Function.
Press the <
Y
> <
Z
> keys to select
the function number, then set the
function. The procedure is the same
as setting the camera’s Custom
Functions (p.388).
1
Select [Clear settings].
Under the [
z
2: Flash control
] tab,
select [
Clear settings
], then press
<
0
>.
2
Select the settings to be cleared.
Select [
Clear built-in flash set.
],
[
Clear external flash set.
], or [
Clear
ext. flash C.Fn set.
], then press
<
0
>.
When you select [
OK
], the respective
flash settings will be cleared.
Setting the External Speedlite Custom Functions
Clear All Settings to Default
With an EX-series Speedlite, if the [
Flash metering mode
] Custom
Function is set to [
TTL flash metering
] (autoflash), the Speedlite will always
fire at full output.
The Speedlite’s Personal Function (P.Fn) cannot be set or canceled on the
camera’s [
Flash control
] screen. Set it directly on the Speedlite.
