Canon DADF-Q1, Руководство по обслуживанию

Страница: 70 / 156

Chapter 2
2-48
F-2-122
The indicator (LED2) of the machine's controller PCB flashes 4 times to indicate a specific jam type:
[EX: if code is 0013]
F-2-123
F-2-124
2.7.2 List of Jam Code
0011-2400
The following shows jam codes, jam types, and associated sensors with descriptions of detection conditions:
T-2-14
Code Sensor type Sensor
notation Description
0001 separation delay S4 At time of separation, the separation sensor does not detect the original when it has been moved over a
specific distance (221 mm) after the start of the separation motor.
0002 pickup delay S4,S2 At time of separation, the pre-registration sensor does not detect the original when it has been moved
over a specific distance (93 mm) after the separation sensor has detected its lead edge.
0003 pickup stationary 1 S3 At time of pickup, the post-registration sensor does not detect the original when it has been moved over
a specific distance (40 mm) after the start of the reversal motor.
0004 pickup stationary 2 S2 At time of pickup, the pre-registration roller sensor detects the original when it has been moved over a
specific distance (330 mm if small; 660 mm if large) after the start of the reversal motor.
0005 reversal delay S1 At time of reversal, the reversal sensor does not detect the original when it has been moved a specific
distance (104 mm) from the platen roller.
0006 reversal stationary S1 At time of reversal, the reversal sensor detects the original when it has been moved over a specific
distance (original length x 1.5 mm) after the end of arching.
0007 delivery delay PI13 At time of delivery, the delivery sensor does not detect the original when it has been moved over a
specific distance (631 mm - original length) after the start of the belt motor.
0008 delivery stationary 1 PI13,S9 At time of delivery, the manual feeder registration roller sensor detects the original when it has been
moved over a specific distance (original 100 mm) after the delivery sensor has gone on.
0009 delivery stationary 2 PI13,S9 At time of delivery, the delivery sensor detects the original when it has been moved over a specific
distance (100 mm) after the manual feeder registration roller sensor has gone off.
0010 pre-reversal delay 1 S3 At time of pre-reversal, the post-registration roller sensor does not detect the original after it has been
moved over a specific distance (50 mm) from the start of the reversal motor.
0011 pre-reversal delay 2 S1,S3 At time of pre-reversal, the reversal sensor does not detect the original when it has been moved over a
specific distance (100 mm) after the post-registration roller sensor has gone on.
Jam code
[1] indicates the presence
of a jam in the machine
PI 4
PI 7
PI6
PI3
PI12
PI 8,
PI 9
S1
S2
S3
S7
S9
PI 10
PI 13
S4,S5
S6 (light-emitting)
S6(light-receiving)