Canon DADF-Q1, Руководство по обслуживанию

Страница: 17 / 156

Chapter 1
1-3
1.2.2 Cross Section
0011-1993
F-1-2
1.3 Using the Machine
1.3.1 Original Set Indicator
0011-2222
The Original Set Indicator [1] goes on when an original is placed on the original tray, and flashes when a jam occurs.
F-1-3
-Warnings and Action to Take
If the Original Set indicator starts to flash while an original is inside the DADF, suspect a jam; go through the following to remove the jam:
1) Remove all originals from the original tray.
2) Open the upper cover, and remove the jam, if found.
3) Open the DADF, and remove the original from the copyboard glass, if found.
4) Put the originals back into initial sequence, and place the stack in the DADF.
[1] Reversing roller B member [13] Delivery roller B member
[2] Reversing roller B [14] Delivery roller
[3] Reversing flapper [15] Delivery guide flapper
[4] Registration pressure roller [16] Feeding belt
[5] Registration roller [17] Stopper plate
[6] Pull-off roller [18] Separation belt
[7] Pull-off pressure roller [19] Feed belt driver roller
[8] Feeding roller [20] Guide flapper
[9] Pickup roller [21] Pre-reversal flapper
[10] Manual feed registration roller [22] Reversing roller A
[11] Manual feed stopper plate [23] Reversing roller A member
[12] elivery roller A member
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12]
[15] [14] [13]
[16] [18] [17] [19] [20] [21] [23] [22]