Canon DADF-Q1, Руководство по обслуживанию

Страница: 102 / 156

Chapter 3
3-24
F-3-165
13) Remove the separation roller.
When mounting the one-way gear, be sure that the protrusion faces inside.
F-3-166
3.4.8 Feeding (pull-off) Roller
3.4.8.1 Removing the Front Cover
0011-8200
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-167
F-3-168
F-3-169
3.4.8.2 Removing the Main Cover
0011-8201
1) Open the upper cover, and insert a screwdriver from above the hook; then,
remove the two hooks [1].
F-3-170
2) Free the hook of the pickup assembly cover [2] from the right stay; then,
detach it while paying attention to the hooks on the front and rear side
plates.
F-3-171
3) When you have removed the ADF controller cover, disconnect the con-
nector [3] of the ADF controller PCB; then, remove the screw [4], and re-
move the grounding wire [5]. Free the harness from the wire saddle [6],
and detach the other saddle [7].
[1] [2]
One-way gear Protrusion
[1]
[1]
[2]
Hooks