Canon CLC5100 Series, Руководство пользователя

Страница: 114 / 290

Chapter 3
3-16
E350 ECOID PCB (faulty)
The ECOID PCB is not mounted.
The connection between ECOID PCB and reader
controller PCB is faulty.
During the power switch has been turned ON, the
communication between ECOID PCB and the reader
controller is not normal.
E351 Image processor PCB (faulty)
The communication within the image processor PCB is
faulty.
E400 Data communication with copier (faulty)
Communication with the copier is monitored at all times.
The communication is disrupted for 5 sec or more.
E401
Pickup motor (M1; faulty)
Pickup roller home position sensor 1 (S8;
faulty)
The sensor state does not change even after the pickup
motor has been driven for more than 2 sec.
E402
Belt motor (M3; faulty)
Belt motor clock sensor (S11; faulty)
The number of belt motor clock pulses is less than a
specific value for 100 ms.
E403
Reversing motor (M2; faulty)
Slip sensor (S10; faulty)
The number of slip clock pulses is below a specific value
for 100 ms.
E404
Delivery motor (M5; faulty)
Delivery motor clock sensor (S12; faulty)
The number of delivery motor clock pulses is below a
specific value for 200 ms.
E405
Pickup motor (M1; faulty)
Pickup motor clock sensor (S12; faulty)
The number of pickup motor clock pulses is below a
specific value for 200 ms.
E407
Pickup motor (M6; faulty)
Tray position sensor (S25; faulty)
The sensor state does not change even the tray ascent
motor is driven for 2 sec or more.
E408
Feeding motor (M8; faulty)
Feeding motor clock sensor (S22; faulty)
The number of feeding motor clock pulses is below a
specific value for 100 ms.
E411
Registration sensor 1 (S3; faulty)
Skew sensor 1 (S4; faulty)
Manual feed registration sensor (S19;
faulty)
Image leading edge sensor (S20; faulty)
Original sensor 1 (S7; faulty)
The output of each sensor in the absence of paper is
higher than a specific value.
E505
0001 Backup RAM
When there is a checksum error in the stacker controller
circuit board RAM data during power on.
E510 Feeding motor (M1; rotation failure)
There is no clock signal from the clock sensor (P15) of
the feeding motor for 250 ms or more.
E510
0001 Feed motor (M1) When feed motor error detect signal is detected.
E511
Code Cause
Description