Canon CLC5100 Series, Руководство пользователя

Страница: 161 / 290

Chapter 5
5-31
remarks: Secord any new values on the service data sheet
Adjusting the Image Read Start Position
You must check the point of retention ('FUNC >ATTRACT') before making the following adjustments:
1) Before starting service mode, turn OFF the original detection mechanism.
2) Select the <ADJXY> screen, and press the Start key. The appropriate copying modes will be set automatically,
and a copy will be made with a shift of about 20 mm as shown in following.
3) If any part of the image is missing, decrease the values of 'ADJX' and 'ADJY'.
4) If an area outside the image is copied, increase the values of 'ADJX' and 'ADJY'.
<DOCREC> ADJUST > DOCREC
T-5-18
remarks: Record any new values on the service data sheet
<ED/RF> ADJUST > ED/RF
T-5-19
ADJUST > DOCREC
Sub item Description
DAXS,
DAXE,
DAYS,
DAYE
Fineadjusts the original detection area.
The original must be placed correctly on the copyboard glass in original
detection mode; if placed at an angle, the copies will have a black frame.
To prevent the problem, set a value by which such frames will be erased.
Settings range:99 to +99 (0 to 6.3mm)
Unit=0.06mm (approx.)
Standard: XS=16 XE=16 YS=16 YE=16
DSDOC You may enter any value as the slice level for original detection. A higher
value increases detection capability but tends to lead to wrong detection.
DSDOC: When detecting ordinary originals
Settings range: 0 to 31 Standard: 20 Density level:0 to 248
ADJUST > ED/RF
Sub item Description
EDMODE Switches editor operation mode.
Settings: 0 to 3 Standard:0
0:Normal operation
1:1point input check
2:Continuous input check