Canon CLC5100 Series, Руководство пользователя

Страница: 45 / 290

Chapter 1
1-31
1.4.4 Cleaning the Transfer Blade
0002-2905
CLC5100 / CLC4000
1) After removing the transfer blade as in step 5), stand the transfer blade assembly [1] on its end as shown in the
following figure; then, wipe the blade [2] and the plastic film [3] with lintfree paper with bottomtotop motions
or clean it with a blower brush.
F-1-9
1.4.5
Cleaning the Grounding Roller
0002-2907
CLC5100 / CLC4000
1) Remove the three screws, and remove the grounding roller unit.
2) Clean the toner off the surface of the roller with lintfree paper.
1.4.6
Cleaning the Developing Assembly Bottom Cover and the Bearing
0002-1929
CLC5100 / CLC4000
If you replaced the photosensitive drum or the cleaning blade, be sure to clean the developing assembly bottom cover
and the bearing as follows:
1) Slide out the process unit from the copier.
2) Remove the developing assembly.
3) Remove the toner found in the area of the developing assembly bottom cover [1] indicated in the figure using a
blower brush or lintfree paper.
4) If toner is found sticking to the developing assembly front side plate or the bearing [2] of the rear side plate, dry
wipe it using lintfree paper.
[1]
[2]
[3]