Canon CLC5100 Series, Руководство пользователя

Страница: 116 / 290

Chapter 3
3-18
0014
The locking cam home position for the buffer
pass unit cannot be detected.
Either or both of the upper cam solenoids are damaged,
or the position of the lower cam sensors lightblocking
plate is faulty.
0015 Either the lower cam solenoid or the sensor is damaged.
E522 Push bar motor (M7; rotation failure)
The operation does not end within 2000 ms after the
motor drive signal has been generated.
E523 Reference wall motor (M6; rotation failure)
The operation does not end within 2000 ms after the
motor drive signal has been generated.
E524 Multi guide motor (M5; rotation failure)
The operation does not end within 2000 ms after the
motor drive signal has been generated.
E525
Bin paper sensor 1 (S3, S4; auto adjustment
fault)
Auto adjustment of the bin paper sensor 1 (S3, S4) cannot
be executed; or, an error has occurred in the auto
adjustment value.
E526 Bin paper sensor 2 (S6, S7; auto adjustment)
Auto adjustment of the bin paper sensor (S6, S7) cannot
be executed; or, an error has occurred in the auto
adjustment value.
E530 Guide bar motor (M8 rotation failure)
The operation does not end within a specific time after
the motor drive signal has been generated: 5000 ms if
front retrieval, and 2000 ms otherwise.
E530
0001
Upper front jog
motor (M8)
When the upper front jog motor does not return to home
position after 2 seconds has elapsed.
0002
Upper front jog
sensor (PI10)
When the upper front jog motor does not move from
home position after 2 seconds has elapsed.
0003 Upper rear jog motor (M9)
When the upper rear jog motor does not return to home
position after 2 seconds has elapsed.
0004
Upper rear jog
sensor (PI11)
When the upper rear jog motor does not move from home
position after 2 seconds has elapsed.
E531
Stapler unit drive motor (M4; rotation
failure)
The operation does not end within 2000 ms after the
motor drive signal has been generated.
There is no clock signal from the clock sensor (P18) of
the motor for 250 ms or more.
The input signal from the shifting home position sensor
(P19) for 1000 ms or more.
E532 Stapler unit shift motor (M3; rotation failure)
The operation does not end within 5000 ms after the
motor drive signal has been generated.
E533 Stapler paper sensor auto adjustment (faulty)
Auto adjustment of the stapler paper sensor cannot be
executed; or, an error has occurred in the auto adjustment
value.
Code Cause
Description