Canon C3220, Справочное руководство

Страница: 154 / 554

Finisher-N1/Saddle Finisher-N2 3-26
3
Optional Equipment
CAUTION
Do not place your hand in the part of the tray where stapling is performed if a
finisher is attached, as this may result in personal injury.
IMPORTANT
•
If the Staple mode is set, the output trays move downward as the stack of paper that is
output increases in quantity and thickness. Once an output tray has reached its stacking
limit, or after 30 sets of prints have been output, printing and stapling stop temporarily.
Remove all of the stapled prints from the output tray, and printing and stapling resume.
•
You can corner staple 11" x 17", LGL, LTR, and LTRR paper. You can double staple
11" x 17" and LTR paper.
•
You cannot staple envelopes, glossy paper, transparencies, tracing paper, labels, tab
paper, or Washi (Japanese paper).
•
Do not pull copies or prints out of the output area while they are being stapled. Remove
the copies or prints after they are output to one of the output trays.
NOTE
•
The maximum number of sheets, including cover sheets, that can be stapled together is
as follows:
- LTR
50 sheets (17 to 20 lb bond (64 to 80 g/m
2
))
30 sheets (20 to 28 lb bond (81 to 105 g/m 2 ))
10 sheets (28 lb bond to 110 lb index (106 to 209 g/m 2 ))
5 sheets (80 lb cover to 140 lb index (210 to 253 g/m
2
))
- 11" x 17", LGL, LTRR
30 sheets (17 to 20 lb bond (64 to 80 g/m 2 ))
20 sheets (20 to 28 lb bond (81 to 105 g/m
2
))
10 sheets (28 lb bond to 110 lb index (106 to 209 g/m
2
))
5 sheets (80 lb cover to 140 lb index (210 to 253 g/m 2 ))
•
If the machine stops while stapling and the message <Load staples.> appears, almost all
of the staples have been used, and the staple cartridge must be replaced. To proceed,
replace the staple cartridge. (See "Replacing the Staple Cartridge in the Stapler Unit," on
p. 7-19.)