Canon C3220, Справочное руководство

Страница: 113 / 554

Making Prints Using the Stack Bypass 2-47
2
Basic Oper
ations
IMPORTANT
•
When loading paper into the stack bypass, align the paper stack neatly between
the slide guides. If the paper is not loaded correctly, a paper jam may occur.
•
If you are printing on heavyweight paper or envelopes using the stack bypass, and
find that the paper or envelopes are not being fed smoothly or evenly through the
stack bypass, remove the paper or envelopes, curl the feeding edges upward
approximately 1/8" (3 mm), then reload the paper or envelopes. Curling the feeding
edges enables the rollers to grip the paper or envelopes as they are fed into the
stack bypass.
NOTE
•
If there are instructions on the paper package about which side of the paper to
load, follow those instructions.
•
When the paper is loaded into the stack bypass, the side facing up is the one
printed on.
•
If problems, such as poor print quality or paper jams occur, try turning the paper
stack over and reload it.
•
For more information on the print direction of preprinted paper (paper which has
logos or patterns already printed on it), see "Relationship between Original
Orientation and Preprinted Paper Output Chart," on p. 9-16.
●
If you are loading tab paper into the stack bypass:
❑
Load the tab paper into the stack bypass, as shown below.
IMPORTANT
•
Make sure that the side to be printed on is placed face up.
•
Make sure that the first sheet of tab paper to be printed on is placed on top.
Feeding Direction