Canon 0373B001AA - Pixma Pro9500 Professional Large Format Inkjet Printer, Быстрый старт

Страница: 75 / 104

Troubleshooting
71
Printed Surface is
Scratched/Back of
Paper is Smudged Media is curled If the paper is curled, it may become marked or not feed properly. Use paper
after correcting paper curl as follows.
When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one
sheet at a time as it is. If you roll up this paper to flatten, this may cause
cracks on the surface of the paper and reduce the print quality.
1. Place the paper on a flat surface with the print side
*1
face up, then cover it
with plain regular paper to avoid damaging the surface.
2. Roll up the paper in the opposite direction as shown in the figure below.
3. Check the printing paper if paper curl is corrected within approximately 2
to 5 mm / 0.08 to 0.2 inches
*2
.
It is recommended to print the curl-corrected paper one sheet at a time.
Problem Possible Cause Try This
(1)
*1
(2)
*2
*1