© 2019
|
Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
29
SETuP GuIDE
SETuP GuIDE
The Setup Guide is a set of menus that help the user select settings to help with
downrigger operation. All of the options in the Setup Guide can be accessed in menus
within the downrigger if preferences change after initial setup. The Setup Guide will first
bring up a menu that gives the user the option to select Language, Battery Alarm,
Temperature, Depth/Distance and Speed. Use the Up
button and the Down
button to
scroll to the options in the list and use the Right
button and the Left
button to change
the setting for each one. Once the options in the first menu are selected, scroll to the
Continue option and use the Right
button to select it. This brings up a second menu in
the Setup Guide. The second menus allows the user to select the amount of Line on Spool,
Line Type and Line Weight. The second menu is navigated in the same way as the first.
Once happy with the selections, scroll to the Complete Setup option and use the Right
button to select it. After the second menu is complete, the downrigger will bring up
information on the Cannon Transducer. Read the information on the Color LCD and then
use the Right
button to Select next. This is followed by a message about the Fish Hawk.
Read the message and then use the Right
button to select Next. Selecting next on the
Fish Hawk screen completes the Setup Guide.
LANGuAGE -
Choose between 1 of 22 languages. The default language is English. Use
the Right
button to confirm the language and make sure that the radio button to
the right of the desired language is selected.
BATTERY ALARM -
Shows an alarm when the battery drops below a certain voltage. The default is set to "off", but can be adjusted between
9.0V and 13.5V. Use the Right
button or the Left
button to edit the sliding scale.
TEMPERATuRE -
Sets the temperature readings to Fahrenheit or Celsius. Use the Right
button or the Left
button to scroll between
the options. The default is set to Fahrenheit.
DEPTh/DISTANCE -
Sets the Distance and Depth reading measurements in units of Feet or Meters. Use the Right
button or the Left
button to scroll between the options. The default is set to Feet.
SPEED -
Sets the Speed measurements in units of mph (miles per hour), kph (kilometers per hour), or kts (knots). Use the Right
button or the Left
button to scroll between the options. The default is set to mph.
LINE ON SPOOL -
Program the downrigger with the amount of Line on the Spool. The spool comes installed with 400 feet of stainless
steel line. The Line on the Spool is set to the default of 400 feet. The range can be adjusted from 150 feet, (the minimum suggested
amount) to 400. The Line on Spool can be adjusted on 50-foot increments on a sliding scale that can be adjusted using the Right
button or the Left
button.
LINE TYPE -
The default Line Type is stainless steel line, but can be set to either Braided, Stainless Steel or Mono. Use the Right
button or the Left
button to scroll between the options.
LINE WEIGhT -
The default Line Weight is 50-150lbs, but can be set to either 50-150lbs, 150-200lbs or 200+lbs. Use the Right
button or the Left
button to scroll between the options.
