© 2019
|
Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
15
INSTALLING ThE BOOM END
INSTALLING ThE SWIVEL hEAD/BOOM END
1
#28 x 1
Item(s) needed:
a. Next install the Boom End (Item #38) on the end of
the Telescopic Boom. Take the Boom End and find
the mounting hole along the shaft. The mounting
hole in the Shaft of the Boom End should be aligned
with the mounting hole in the Center Tube at the
narrow end of the Telescopic Boom.
b. Once aligned, take the #8-18 X 5/8" Screw (Item
#28) and insert it into the end of the Boom
Assembly. Secure the screw with a Phillips Head
screwdriver by turning clockwise.
7k
1a
1b
7k
7
k. Secure the orientation of the Bolt Hook by turning
the Hex Nut on the Bolt Hook Assembly until it is
seated tightly against the Ball Hook Extrusion with
a 7/16" wrench. Hand tighten until secure.
#38 x 1
Mounting
Holes
Center Tube
Center Tube
Shaft
Bolt Hook
Bolt Hook
Downrigger
Assembly
Downrigger
Assembly
Nylock
Nut
Nylock
Nut
Ball Hook Extrusion
Telescopic
Boom
Telescopic
Boom
Ball Hook Extrusion
Boom End
Boom
End
Telescopic Boom
Telescopic
Boom
Narrow End
Wide End
