© 2019
|
Johnson Outdoors Marine Electronics, Inc.
|
cannondownriggers.com
17
TERMINATING THE DOWNRIGGER CABLE
#30 X 1
Item(s) needed:
d. The Clutch Knob holds tension on the Spool.
Loosen the Clutch Knob on the side of the
downrigger by turning it clockwise while
keeping tension on the Line. Pull the Line
so that there is enough slack to feed the Line
through the Pulley.
e. Feed the Line through the Pulley on the
Boom End so that it exits the Pulley on the far
end of the Pulley away from the base of the
downrigger. Once it passes through the
Pulley, pull approximately 2 feet of Line through
the Pulley.
f. Re-tighten the Clutch Knob by turning it
counterclockwise and keep tension on the Line.
g. Have a second person hold the Line just past the
downrigger Boom End to keep tension on the
Line. Remove the Rubber Band from the end of
the Line.
h. Take a wire cutter and remove any worn or
kinked Line.
2
3
NOTICE: When routing Line through the Terminator,
use only straight Line. Worn or kinked Line can be
stressed and may break prematurely when retrieving
trolling weights.
i. Take the Cushion Sleeve Terminator (Item #30)
and feed the Line so that the narrower end of the
sleeve is threaded first. Thread about a foot of Line
through the Cushion Sleeve Terminator.
2d
2e
2f
Clutch
Knob
Spool
Line
Rubber
Band
Pulley
Boom End
Clutch
Knob
3g
3i
Line
Pulley
Line
Boom End
Telescopic
Boom
Cushion Sleeve
Terminator
