6. Normal operation
6. Normal operation
6.7.8.1.2 Relay-Fault Func
6.7.8.1.3 ILeak-Fault Func
6.7.8.1.4 PV-G-Fault Func
Press the ENTER
to
show
the
submenu
of
Grid Filter Set
.
Press the UP
/
DOWN
key to select the value
.
Press the ENTER key to save the setting
and
return to the previous menu.
6.7.8.1.1 Grid Filter No.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
.61.
.60.
There are 10 items in special_1 Set submenu.
Figure 6.31 Special_1 set
版本号
2015-02-23 19 35
Special_1 Set
2015-02-23 19 35
Grid Filter NO.
：
Relay-Fault Func.
：
00
Run
ILeak –Fault Func.
：
Run
PV-G-Fault Func.
：
GRID-INTF.02
：
Run
Stop
E S C
U P
D O W N
E N T
6.7.8
.
1 Special_1 Set
MPPT Parallel
：
Stop
CV_mode
：
Voltage Select
：
600V
IgADCheckPRO
：
NoSmallPulse
：
Run
Stop
Stop
S E T
=
< E N T >
D O N E
=
< E S C >
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6.7.8.1.5 GRID-INTF.02
6.7.8.1.6 MPPT Parallel
This is used for parallel strings into different inverters MPPTs.
Press Enter and press up or down to change the settings.
Selecting RUN will enable parallel strings setup. All MPPT channels will operate in parallel.
Selecting STOP disables parallel string setup. AII MPPT channels will operate independently.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
Selecting RUN will enable fixed input voltage. The inverter will not operate if the input
voltage is lower than the set voltage.
Selecting STOP will disable this function.
6.7.8.1.7 CV_mode
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
Select the value of fixed input voltage. And the increment is 10V.
6.7.8.1.8 Voltage Select
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6.7.8.1.9 IgADCheckPRO
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
6.7.8.1.10 NoSmallPulse
This function is applicable by maintenance personnel only.
