3. Installation
1). Remove the waterproof connector cover and put it in the space as shown.
Retain the four M4 screws by screwing into the screw holes on the mounting rack.
3. Installation
3.7 Installing the inverter
2). Loosen the M6 screws on both sides of the wire box. Do not remove the screws.
Hex screx M6
3). Lift the inverter power train, and hang it on the top of the mounting bracket.
Step 1
Step 2
Figure 3.13
Figure 3.14
Figure 3.15
.27.
.26.
Waterproof cover
4). The positioning plate of inverter should insert into the positioning slot.
Positioning plate
Positioning slot
Figure 3.16
