.57.
.56.
6. Normal operation
6. Normal operation
Figure 6.24 Save and set screen at conclusion of setting grid standard
Save
/
Cancel
2015-02-23 19 35
Save
&
Send
Cancel
&
Exit
Y E S
=
< E N T >
N O
=
< E S C >
6.7.2 Grid ON/OFF
This function is used to start or stop the inverter from generating power (see Figure 6.25).
This function may be used to manually disable an inverter during maintenance without turning
off the AC switch.
Press the UP or DOWN key to move the cursor. Press the ENTER key to execute the setting.
Press the ESC key to return to the previous menu.
Figure 6.25 Set grid ON/OFF
Grid
ON
/
OFF
2015-02-23 19 35
Grid
ON
Grid
OFF
Y E S
=
< E N T >
N O
=
< E S C >
NOTE
This function should be accessed by qualified maintenance personnel
only. The inverter operating in the wrong power setting will prevent the
inverter from reaching maximum power.
6.7.4 Clear Energy and Restore Settings
Clear Energy will reset the inverter's yield.
Restore Settings will reset all the settings to factory default.
NOTE
These two functions should be accessed by qualified maintenance
personnel only. Operating the inverter with the wrong settings will
prevent the inverter from working properly.
6.7.5 Calibrate
Warranty or maintenance may result in resetting total generating data. This function allows
maintenance personnel to amend the total generating data of the replacement inverter to the
original one (see Figure 6.27).
By using our data monitoring hardware, the data on the monitoring website can automatically
synchronize with the preset total generating power of the inverter.
6.7.3 Power Control
Active and reactive power can be set through the Power Control option (see Figure 6.26).
Figure 6.26 Power setting
Power
Control
2015-02-23 19 35
Output
Power
Control
Reactive
Power
Control
Output
Power
Cortrol
With
Restore
Reactive
Power
Control
With
Restore
When changes are complete, select ENTER. The following screen appears. Select “SAVE &
SEND” to write the custom grid settings to memory and begin using them.
