Can-Am DS 450 X mx Скачать руководство пользователя страница 138 | Manualshive

Страница: 138 / 152

background image

– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator's Guide;

– Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP
or resulting from repairs done by a person that is not an authorized servicing
Can-Am distributor/dealer;

– Damage caused by abuse, abnormal use, neglect or operation of the product in

a manner inconsistent with the recommended operation described in the Oper-
ator’s Guide;

– Damage resulting from accident, submersion, fire, theft, vandalism or any act of

God;

– Operation with fuels, oils or lubricants which are not suitable for use with the

product (see the Operator’s Guide);

– Water or snow ingestion;
– Incidental or consequential damages, or damages of any kind including without

limitation towing, storage, telephone, rental, taxi, inconvenience, insurance
coverage, loan payments, loss of time, loss of income.

4) WARRANTY COVERAGE PERIOD

This warranty will be in effect from the date of delivery to the first retail consumer
or the date the product is first put into use, whichever occurs first and for a period
of:

SIX (6) CONSECUTIVE MONTHS for private use or commercial use.

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

5) CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available

only

if

each

of the following conditions has

been fulfilled:

– The 2010 Can-Am ATV must be purchased as new and unused by its first owner

from a Can-Am distributor/dealer authorized to distribute Can-Am ATVs in the
country in which the sale occurred (“Can-Am distributor/dealer”);

– The BRP specified pre-delivery inspection process must be completed and doc-

umented;

– The product must have undergone proper registration by an authorized Can-Am

distributor/dealer;

– The 2010 Can-Am ATV must be purchased in the country or union of countries in

which the purchaser resides; and

– Routine maintenance outlined in the Operator’s Guide must be timely per-

formed in order to maintain warranty coverage. BRP reserves the right to make
warranty coverage contingent upon proof of proper maintenance.

136

______________

«
...
136
137
138
139
140
...
»

Содержание DS 450 X mx

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS 450 X mx

Бренд: GEDA Страницы: 36

Бренд: Massimo Motor Страницы: 165

Бренд: Taylor-Dunn Страницы: 254

Бренд: Polaris Страницы: 690

Twister UM250IIR

Бренд: Hammerhead Страницы: 67

Бренд: Snapper Страницы: 6

Бренд: Snapper Страницы: 8

Бренд: Snapper Страницы: 36

Бренд: Satellite Suites Страницы: 39

Бренд: Tomberlin Страницы: 142

Бренд: Polaris Страницы: 174

Бренд: ACG Страницы: 97

Бренд: E-ride Industries Страницы: 109

Бренд: Landoll Страницы: 88

Бренд: KAYO MOTOR Страницы: 80

Ground Force 300001-SL

Бренд: Razor Страницы: 20

Бренд: Humbaur Страницы: 56

2001 TRX250EX Sportrax 250EX

Бренд: Honda Страницы: 153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды