Can-Am DS 450 X mx Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 152

background image

BRP LIMITED WARRANTY USA AND CANADA: 2010
CAN-AM

TM

ATV

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2010 Can-Am ATV
sold by authorized BRP dealers (as hereinafter defined) in the fifty United States
and Canada from defects in material or workmanship for the period and under the
conditions described below.

This limited warranty will become null and void if: (1) the ATV was used for racing
or any other competitive activity, at any point, even by a previous owner; or (2)
the ATV has been altered or modified in such a way so as to adversely affect its
operation, performance or durability, or has been altered or modified to change its
intended use.

All genuine Can-Am ATV parts and accessories, installed by an authorized BRP
dealer at the time of delivery of the 2010 Can-Am ATV, carry the same warranty as
that of the Can-Am ATV.

2) LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT
BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSE-
QUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY. SOME STATES/PROVINCES DO NOT ALLOW FOR THE DIS-
CLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

Neither the distributor, any BRP dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforceable
against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;
– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator's Guide;

130

______________

«
...
130
131
132
133
134
...
»

Содержание DS 450 X mx

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS 450 X mx

Бренд: ODES Страницы: 136

Бренд: Lean Cars Страницы: 12

Бренд: Komatsu Страницы: 435

Бренд: Craftsman Страницы: 80

Бренд: Yamaha Страницы: 46

Бренд: Yamaha Страницы: 155

Бренд: Yamaha Страницы: 190

Бренд: Dynacraft Страницы: 31

Outlander 500 2008

Бренд: Can-Am Страницы: 152

Sniper T-1500 2S

Бренд: BMS Страницы: 69

Бренд: Satellite Suites Страницы: 39

Бренд: NC Страницы: 33

KTR-150 Go Kart

Бренд: Roketa Страницы: 8

Utility Trailer-Small

Бренд: CYCLETOTE Страницы: 2

GROUND FORCE GO KART V.1+

Бренд: Razor Страницы: 2

Бренд: UtilityMate Страницы: 8

Бренд: KYMCO Страницы: 171

Cushman Shuttle 4 ELiTE 2020

Бренд: Textron Specialized Vehicles Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды