27
ENGLISH
26
ENGLISH
• Position the chain on the fourth sprocket counting from the smallest.
• Turn the cable tension adjuster (F - Fig. 5) until perfect alignment is obtained between the
centreline of the top roller and the centreline of the fourth sprocket.
• If centering between the centrelines of the roller and the fourth sprocket is not correct,
turn the adjuster (F - Fig. 5) counterclockwise to shift the rear derailleur inwards. Turn
clockwise to shift the rear derailleur outwards.
• Check that when the shifter is actuated accordingly, the rear derailleur positions the chain
on the largest sprocket; if this does not occur, turn the screw (G - Fig. 6) repeatedly (slack-
ening it until the chain is positioned on the largest sprocket without overshifting).
5
F
7
H
G
6
G
• Make sure that the screw (G - Fig. 7) is
correctly adjusted: by operating the gear
lever with the chain on the largest
sprocket, the inner plate of the derailleur
cage must
NOT
come into contact with
the spokes.
• Make sure that all gear ratios work per-
fectly.
• Fit the chain on the max. sprocket and
on the smallest front chainring.
• If the upper part of the cage touches the
sprockets, turn the screw (H - Fig. 7) anti-
clockwise until the cage withdraws.
• It is advisable not to exceed the declared
values for total gear capacity and the
max. sprocket shown in page 19.
ATTENTION!
Derailleur adjustments must be performed by skilled personnel: a badly adjusted derailleur
can result in an accident, personal injury or death.
7225195 - Cambio 6-02-2002 12:17 Pagina 26
