11
ITALIANO
10
ITALIANO
1
2
B
A
3
5. MONTAGGIO DEL CAVO E REGISTRAZIONE
• Effettuare questa operazione con la cate-
na posizionata sul pignone più piccolo
della ruota libera e con il pulsante del
comando Ergopower azzerato (Fig. 1).
• Avvitare al massimo la vite girandola in
senso orario (A - Fig. 2).
• Girate la vite (B - Fig. 2) fino ad ottenere
un perfetto allineamento della mezzeria
della rotellina superiore con il primo
pignone (Fig. 3).
• Verificare che la lunghezza della guaina sia corretta, eventualmente togliere la parte in
eccesso avendo cura di tagliarla in squadra, senza alterarne la sezione; una guaina di lun-
ghezza insufficiente compromette il funzionamento del cambio. Cavi e guaine
non neces-
sitano di essere lubrificati
in quanto sono forniti pre-lubrificati.
• Passare il cavo attraverso la vite di registrazione (C - Fig. 4) e inserirvi l’estremità della
guaina, fare passare il cavo sotto la piastrina (E - Fig. 4) e bloccarlo avvitando la vite a
brugola (D - Fig. 4). Tagliare il cavo in eccesso a circa due centimetri dalla vite di bloc-
caggio e coprire l’estremità con un salvacavo.
Coppia di serraggio: 6 N.m - 4,4 lb.ft
4
C
D
E
Chiave a brugola 5 mm
6 N.m - 4,4 lb.ft
CHIUDERE
7225195 - Cambio 6-02-2002 12:17 Pagina 10