UNIVERSAL SPINNER BIKE CONSOLE
INSTRUCTION MANUAL
DT-3267 SPINNER BIKE CONSOLE SPECIFICATION
CADENCE BAR GRAPHIC: 0~199rpm
RPM : 0 ~ 199 RPM
SPEED : 0 ~ 99 KM/H
PULSE : 30 ~ 240 BPM
Time : Count down setting range 1~99 Minuets
Count up range 00:01~99:59
Protocol
: BLE4.0
IMPORTANT SAFETY INSTRUCTIONS WARNING
BEFORE BEGINNING THIS OR ANY OTHER
EXERCISE PROGRAM, CONSULT A PHYSICIAN. THE
PHYSICIAN CAN HELP YOU BETTER DETERMINE
WHAT ACTIVITIES OR PROGRAMS ARE MOST
SUITED FOR YOU. IF AT ANY TIME DURING THE
WORKOUT YOU FEEL FAINT, OR CHEST PAINS, OR
SEVER SHORTNESS OF BREATH, STOP
EXERCISING IMMEDIATLELY AND CONSULT A
PHYSICAN.
The Universal Spinner Bike Console assembly consists
of a computer console, a magnet, one chest belt, and a
wired speed sensor. The sensor counts the number of
times the magnet (mounted on the crank) passes the
sensor. The speed sensor connect to the console, and
measured the speed and cadence.
The computer console use AAA type batteries. Please
install the supplied AAA batteries in the computer
console before using.
