Cameron Scanner 2000 microEFM, Руководство пользователя по оборудованию

Страница: 145 / 190

D-17
Scanner
®
2000 microEFM Appendix D
Analog Input 1 Calibration
Register
(Decimal)
Register
(Hex) Description
Data
Type Access Default
2567 A07 A1 - Calibration Measured 5 FP R/W 0.00
2569 A09 A1 - Calibration Measured 6 FP R/W 0.00
2571 A0B A1 - Calibration Measured 7 FP R/W 0.00
2573 A0D A1 - Calibration Measured 8 FP R/W 0.00
2575 A0F A1 - Calibration Measured 9 FP R/W 0.00
2577 A11 A1 - Calibration Measured 10 FP R/W 0.00
2579 A13 A1 - Calibration Measured 11 FP R/W 0.00
2581 A15 A1 - Calibration Measured 12 FP R/W 0.00
1
The Calibration Type register must be configured using ModWorX Pro. This register defines the type and
number of calibration points used. If altered manually, calibration points must be entered in ascending order.
Analog Input 2 Configuration
Register
(Decimal)
Register
(Hex) Description
Data
Type Access Default
2600 A28 A2 - Units U16 R/W 0
2601 A29 A2 - Time Base U16 R/W 0
2602 A2A A2 - Sampling Period U16 R/W 1
2603 A2B A2 - Dampening Factor U16 R/W 0
2604 A2C A2 - Input Config U16 R/W 0
2605 A2D A2 - Override Enable U16 R/W 0
2606 A2E A2 - Override Value FP R/W 0.00
2608 A30 A2 - Fail Value FP R/W 0.00
2610 A32 A2 - Low Input Cutoff FP R/W 2.00
2612 A34 A2 - Low Flow Cutoff FP R/W 0.00
2614 A36 A2 - Sensor Range Low FP RO 0.00
2616 A38 A2 - Sensor Range High FP RO 0
2618 A3A A2 - Units Scale Factor FP R/W 1
2620 A3C A2 - Units Offset Factor FP R/W 0
2622 A3E A2 - Unit Description 1 LCD R/W —
2623 A3F A2 - Unit Description 2 LCD R/W —
2624 A40 A2 - Unit Description 3 LCD R/W —
Analog Input 2 Calibration
Register
(Decimal)
Register
(Hex) Description
Data
Type Access Default
2630 A46 A2 - Calibration Type 1 U16 R/W 0
2631 A47 A2 - Nominal Value FP R/W —
2633 A49 A2 - Calibration Absolute Offset FP R/W 0.00
2635 A4B A2 - Calibration Actual 1 FP R/W 0.00
2637 A4D A2 - Calibration Actual 2 FP R/W 0.00