Chapter 3: Configuration Guide
Configuring a Link Using the Quick Configuration
Wizard
phn-3963_004v000
Page 3-8
2
In the Radio #1 Interface field, select the first radio interface for the link.
3
Click Next. Page 2 of the 1+0 Repeater Quick Configuration wizard opens.
Figure 31 1+0 Repeater Quick Configuration Wizard – Page 2
4
In the Radio #2 Interface field, select the second radio interface for the link.
5
In the Pipe Type field, select the Attached Interface type for the service that will connect the
radios. Options are:
o
s-tag – A single S-VLAN is classified into the service points.
o
dot1q - A single C-VLAN is classified into the service points.
Note
For a full explanation of Ethernet Services, service types, and attached interface types,
see
Configuring Ethernet Service(s)
6
Click Next. Page 3 of the 1+0 Repeater Quick Configuration wizard opens.