Chapter 6: Ethernet Services and Interfaces
Viewing Ethernet PMs and Statistics
phn-3963_004v000
Page 6-30
Figure 134 Ethernet PM Port Admin Page
2.
Select the interface.
3.
Click Enable Port PM or Disable Port PM to enable or disable the gathering of Port TX PMs on
the selected interface.
4.
Click Close.
Setting the Ethernet Port TX Threshold
The TX bytes Layer 1 exceed threshold (sec) column shows, for each interval, the number of
seconds the TX bytes exceeded the specified threshold during the interval:
To view and set this threshold:
1.
In the Ethernet Port TX PM Report page, click Threshold. The Ethernet Port Tx Threshold page
opens.
Figure 135: Ethernet Port Tx Threshold Page
2.
Enter a threshold, between 0 and 4294967295.