CAMAG ADC 2, Руководство пользователя

Страница: 34 / 40

ADC 2
2. Installation
1
Fig.13: Ventilation valve module: 1= fixation screws.
9
For adapting the Humidity Control device, four screws (1)
are provided to fix it on the back of the ADC2; they are used
as fixation of the ventilation valve module.
9
The ventilation valve module is mounted on a holding plate
that has to be placed in the position over the four screws
and tightened. Next, the two hoses already fixed on the ven-
tilation valve module must be connected to the sockets
above (fig.13).
9
After this the top cover can be attached and fixed with one
screw at each side of the module (see fig. 15.1).
9
Connect the cable to the appropriate connector (fig. 3).
Manual, August 2005 Page 34